L298D Motor Driver - Dual H Bridge

L298D Motor Driver - Dual H Bridge

L298D Motor Driver - Dual H Bridge

  • Product Code : MOT0001
  • Availability : In Stock
  • Rs 650.00

Double H driver module uses ST L298N dual full-bridge driver, an integrated monolithic circuit in a 15- lead Multi watt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Two enable inputs are provided to enable or disable the device independently of the input signals. The emitters of the lower transistors of each bridge are connected together and the corresponding external terminal can be used for the connection of an external sensing resistor. An additional supply input is provided so that the logic works at a lower voltage.

This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V, it can enable the on-board 5V logic power supply.

ENA enable IN1 IN2 control OUT1 OUT2 
ENB enable IN3 IN4 control OUT3 OUT4

  • Instantaneous Current Rise (max): 3A
  • Logic Level Power Vss: 5V ~ 7V (> 7V 5v regulator circuit is available on board. Card)
  • Logic Level Power: 0 ~ 36mA
  • Logic Signal Input Rate : ( Low: -0.3V ≤ 1.5V ) ( High: 2.3V ≤ Vin ≤ Vss)
  • Max Power: 20W (Temperature T=75°C)
  • LED indicator
Arduino Boards
Operating Voltage 5V~35V
Motor Driver
Driver L298N Dual H Bridge DC Motor Control
Max Average Current 2A

Write a review

Note: HTML is not translated!
    Bad           Good